Direct and indirect photodegradation in aquatic systems mitigates photosensitized toxicity in screening-level substance risk assessments of selected petrochemical structures.

Photochemical processes are typically not incorporated in screening-level substance risk assessments due to the complexity of modeling sunlight co-exposures and resulting interactions on environmental fate and effects. However, for many substances, sunlight exerts a profound influence on environmental degradation rates and ecotoxicities. Recent modeling advances provide an improved technical basis for estimating the effect of sunlight in modulating both substance exposure and toxicity in the aquatic environment. Screening model simulations were performed for 25 petrochemical structures with varied uses and environmental fate properties. Model predictions were evaluated by comparing the ratios of predicted exposure concentrations with and without light to the corresponding ratios of toxicity thresholds under the same conditions. The relative ratios of exposure and hazard in light vs. dark were then used to evaluate how inclusion of light modulates substance risk analysis. Results indicated that inclusion of light reduced PECs by factors ranging from 1.1- to 63-fold as a result of photodegradation, while reducing PNECs by factors ranging from 1- to 49-fold due to photoenhanced toxicity caused by photosensitization. Consequently, the presence of light altered risk quotients by factors that ranged from 0.1- to 17-fold, since the predicted increase in substance hazard was mitigated by the reduction in exposure. For many structures, indirect photodegradation decreases environmental exposures independently of the direct photolysis pathway which is associated with enhanced phototoxicity. For most of the scenarios and chemicals in the present work, photosensitization appears to be mitigated by direct and indirect degradation from sunlight exposure.

Parsing the toxicity paradox: Composition and duration of exposure alter predicted oil spill effects by orders of magnitude.

Oil spilled into an aquatic environment produces oil droplet and dissolved component concentrations and compositions that are highly variable in space and time. Toxic effects on aquatic biota vary with sensitivity of the organism, concentration, composition, environmental conditions, and frequency and duration of exposure to the mixture of oil-derived dissolved compounds. For a range of spill (surface, subsea, blowout) and oil types under different environmental conditions, modeling of oil transport, fate, and organism behavior was used to quantify expected exposures over time for planktonic, motile, and stationary organisms. Different toxicity models were applied to these exposure time histories to characterize the influential roles of composition, concentration, and duration of exposure on aquatic toxicity. Misrepresenting these roles and exposures can affect results by orders of magnitude. Well-characterized laboratory studies for <24-hour exposures are needed to improve toxicity predictions of the typically short-term exposures that characterize spills.

In Silico Acute Aquatic Hazard Assessment and Prioritization Using a Grouped Target Site Model: A Case Study of Organic Substances Reported in Permian Basin Hydraulic Fracturing Operations.

Hydraulic fracturing (HF) is commonly used to enhance onshore recovery of oil and gas during production. This process involves the use of a variety of chemicals to support the physical extraction of oil and gas, maintain appropriate conditions downhole (e.g., redox conditions, pH), and limit microbial growth. The diversity of chemicals used in HF presents a significant challenge for risk assessment. The objective of the present study is to establish a transparent, reproducible procedure for estimating 5th percentile acute aquatic hazard concentrations (e.g., acute hazard concentration 5th percentiles [HC5s]) for these substances and validating against existing toxicity data. A simplified, grouped target site model (gTSM) was developed using a database (n = 1696) of diverse compounds with known mode of action (MoA) information. Statistical significance testing was employed to reduce model complexity by combining 11 discrete MoAs into three general hazard groups. The new model was trained and validated using an 80:20 allocation of the experimental database. The gTSM predicts toxicity using a combination of target site water partition coefficients and hazard group-based critical target site concentrations. Model performance was comparable to the original TSM using 40% fewer parameters. Model predictions were judged to be sufficiently reliable and the gTSM was further used to prioritize a subset of reported Permian Basin HF substances for risk evaluation. The gTSM was applied to predict hazard groups, species acute toxicity, and acute HC5s for 186 organic compounds (neutral and ionic). Toxicity predictions and acute HC5 estimates were validated against measured acute toxicity data compiled for HF substances. This case study supports the gTSM as an efficient, cost-effective computational tool for rapid aquatic hazard assessment of diverse organic chemicals. Environ Toxicol Chem 2024;43:1161-1172. © 2024 ExxonMobil Petroleum and Chemical BV. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Effects of aromatic hydrocarbons and evaluation of oil toxicity modelling for larvae of a tropical coral.

Application of oil toxicity modelling for assessing the risk of spills to coral reefs remains uncertain due to a lack of data for key tropical species and environmental conditions. In this study, larvae of the coral Acropora millepora were exposed to six aromatic hydrocarbons individually to generate critical target lipid body burdens (CTLBBs). Larval metamorphosis was inhibited by all six aromatic hydrocarbons, while larval survival was only affected at concentrations >2000 µg L-1. The derived metamorphosis CTLBB of 9.7 µmol g-1 octanol indicates larvae are more sensitive than adult corals, and places A. millepora larvae among the most sensitive organisms in the target lipid model (TLM) databases. Larvae were also more sensitive to anthracene and pyrene when co-exposed to ecologically relevant levels of ultraviolet radiation. The results suggest that the application of the phototoxic TLM would be protective of A. millepora larvae, provided adequate chemical and light data are available.

Sensitivity of the Indo-Pacific coral Acropora millepora to aromatic hydrocarbons.

The risks posed by petroleum spills to coral reefs are poorly understood and quantifying acute toxicity thresholds for aromatic hydrocarbons to reef-building corals is required to assess their sensitivity relative to other taxa. In this study, we exposed Acropora millepora to toluene, naphthalene and 1-methylnaphthalene (1-MN) in a flow-through system and assessed survivorship and sublethal responses including growth, colour and the photosynthetic performance of symbionts. Median 50% lethal concentrations (LC50s) decreased over the 7-d exposure period, reaching asymptotic values of 22,921, 5,268, 1167 µg L-1 for toluene, naphthalene and 1-MN, respectively. Corresponding toxicokinetic parameters (εLC50) defining the time progression of toxicity were 0.830, 0.692, and 0.256 d-1, respectively. Latent effects after an additional 7-d recovery in uncontaminated seawater were not observed. Effect concentrations (EC50s) for 50% growth inhibition were 1.9- to 3.6-fold lower than the LC50s for each aromatic hydrocarbon. There were no observed effects of aromatic hydrocarbon exposure on colour score (a proxy for bleaching) or photosynthetic efficiency. Acute and chronic critical target lipid body burdens (CTLBBs) of 70.3 ± 16.3 and 13.6 ± 18.4 µmol g-1 octanol (± standard error) were calculated for survival and growth inhibition based on 7-d LC50 and EC10 values, respectively. These species-specific constants indicate adult A. millepora is more sensitive than other corals reported so far but is of average sensitivity in comparison with other aquatic taxa in the target lipid model database. These results advance our understanding of acute hazards of petroleum contaminants to key habitat-building tropical coral reef species.

Recommendations for advancing media preparation methods used to assess aquatic hazards of oils and spill response agents.

Laboratory preparation of aqueous test media is a critical step in developing toxicity information needed for oil spill response decision-making. Multiple methods have been used to prepare physically and chemically dispersed oils which influence test outcome, interpretation, and utility for hazard assessment and modeling. This paper aims to review media preparation strategies, highlight advantages and limitations, provide recommendations for improvement, and promote the standardization of methods to better inform assessment and modeling. A benefit of media preparation methods for oil that rely on low to moderate mixing energy coupled with a variable dilution design is that the dissolved oil composition of the water accommodation fraction (WAF) stock is consistent across diluted treatments.  Further, analyses that support exposure confirmation maybe reduced and reflect dissolved oil exposures that are bioavailable and amenable to toxicity modeling.  Variable loading tests provide a range of dissolved oil compositions that require analytical verification at each oil loading. Regardless of test design, a preliminary study is recommended to optimize WAF mixing and settling times to achieve equilibrium between oil and test media. Variable dilution tests involving chemical dispersants (CEWAF) or high energy mixing (HEWAF) can increase dissolved oil exposures in treatment dilutions due to droplet dissolution when compared to WAFs. In contrast, HEWAF/CEWAFs generated using variable oil loadings are expected to provide dissolved oil exposures more comparable to WAFs. Preparation methods that provide droplet oil exposures should be environmentally relevant and informed by oil droplet concentrations, compositions, sizes, and exposure durations characteristic of field spill scenarios. Oil droplet generators and passive dosing techniques offer advantages for delivering controlled constant or dynamic dissolved exposures and larger volumes of test media for toxicity testing. Adoption of proposed guidance for improving media preparation methods will provide greater comparability and utility of toxicity testing in oil spill response and assessment.

Recommendations for improving the reporting and communication of aquatic toxicity studies for oil spill planning, response, and environmental assessment.

Standardized oil toxicity testing is important to ensure comparability of study results, and to generate information to support oil spill planning, response, and environmental assessments. Outcomes from toxicity tests are useful in the development, improvement and validation of effects models, and new or revised knowledge could be integrated into existing databases and related tools. To foster transparency, facilitate repeatability and maximize use and impact, outcomes from toxicity tests need to be clearly reported and communicated. This work is part of a series of reviews to support the modernization of the "Chemical Response to Oil Spills: Ecological Effects Research Forum" protocols focusing on technological advances and best toxicity testing practices. Thus, the primary motivation of the present work is to provide guidance and encourage detailed documentation of aquatic toxicity studies. Specific recommendations are provided regarding key reporting elements (i.e., experimental design, test substance and properties, test species and response endpoints, media preparation, exposure conditions, chemical characterization, reporting metric corresponding to the response endpoint, data quality standards, and statistical methods, and raw data), which along with a proposed checklist can be used to assess the completeness of reporting elements or to guide study conduct. When preparing journal publications, authors are encouraged to take advantage of the Supplementary Material section to enhance dissemination and access to key data and information that can be used by multiple end-users, including decision-makers, scientific support staff and modelers. Improving reporting, science communication, and access to critical information enable users to assess the reliability and relevance of study outcomes and increase incorporation of results gleaned from toxicity testing into tools and applications that support oil spill response decisions. Furthermore, improved reporting could be beneficial for audiences outside the oil spill response community, including peer reviewers, journal editors, aquatic toxicologists, researchers in other disciplines, and the public.

Adopting a toxic unit model paradigm in design, analysis and interpretation of oil toxicity testing.

The lack of a conceptual understanding and unifying quantitative framework to guide conduct and interpretation of laboratory oil toxicity tests, has led investigators to divergent conclusions that can confuse stakeholders and impede sound decision-making. While a plethora of oil toxicity studies are available and continue to be published, due to differences in experimental design, results between studies often cannot be compared. Furthermore, much resulting data fails to advance quantitative effect models that are critically needed for oil spill risk and impact assessments. This paper discusses the challenges posed when evaluating oil toxicity test data based on traditional, total concentration-based exposure metrics and offers solutions for improving the state of practice by adopting a unifying toxic unit (TU) model framework. Key advantages of a TU framework is that differences in test oil composition, sensitivity of the test organism/endpoint, and toxicity test design (i.e., type of test) can be taken into quantitative account in predicting aquatic toxicity. This paradigm shift is intended to bridge the utility of laboratory oil toxicity tests with improved assessment of effects in the field. To illustrate these advantages, results from literature studies are reassessed and contrasted with conclusions obtained based on past practice. Using instructive examples, model results are presented to explain how dissolved oil composition and concentrations and resulting TUs vary in WAFs prepared using variable loading or dilution test designs and the important role that unmeasured oil components contribute to predicted oil toxicity. Model results are used to highlight how the TU framework can serve as a valuable aid in designing and interpreting empirical toxicity tests and provide the data required to validate/refine predictive toxicity models. To further promote consistent exposure and hazard assessment of physically and chemically dispersed oil toxicity tests recommendations for advancing the TU framework are presented.

Calibration of an acute toxicity model for the marine crustacean, Artemia franciscana, nauplii to support oil spill effect assessments.

Oil spill risk and impact assessments rely on time-dependent toxicity models to predict the hazard of the constituents that comprise crude oils and petroleum substances. Dissolved aromatic compounds (ACs) are recognized as a primary driver of aquatic toxicity in surface spill exposure scenarios. However, limited time-dependent toxicity data are available for different classes of ACs to calibrate such models. This study examined the acute toxicity of 14 ACs and 3 binary AC mixtures on Artemia franciscana nauplii at 25 °C. Toxicity tests for 3 ACs were also conducted at 15 °C to evaluate the role of temperature on toxicity. The ACs investigated represented parent and alkylated homocyclic and nitrogen-, sulfur- and oxygen-containing heterocyclic structures with octanol-water partition coefficients (log Kow) ranging from 3.2 to 6.6. Passive dosing was used to expose and maintain concentrations in toxicity tests which were confirmed using fluorometry, and independently validated for 6 ACs using GC-MS analysis. Mortality was assessed at 6, 24, and 48 h to characterize the time course of toxicity. No mortality was observed for the most hydrophobic AC tested, 7,12-dimethylbenz[a]anthracene, due to apparent water solubility constraints. Empirical log LC50 s for the remaining ACs were fit to a linear regression with log Kow to derive a critical target lipid body burden (CTLBB) based on the target lipid model. The calculated 48 h CTLBB of 47.1 ± 8.1 µmol/g octanol indicates that Artemia nauplii exhibited comparable sensitivity to other crustaceans. A steep concentration-response was found across all compounds as evidenced by a narrow range (1.0-3.1) in the observed LC50 /LC10 ratio. Differences in toxicokinetics were noted, and no impacts of temperature-dependence of AC toxicity were found. Toxicity data obtained for individual ACs yielded acceptable predictions of observed binary AC mixture toxicity. Results from this study advance toxicity models used in oil spill assessments.

Bridging the lab to field divide: Advancing oil spill biological effects models requires revisiting aquatic toxicity testing.

Oil fate and exposure modeling addresses the complexities of oil composition, weathering, partitioning in the environment, and the distributions and behaviors of aquatic biota to estimate exposure histories, i.e., oil component concentrations and environmental conditions experienced over time. Several approaches with increasing levels of complexity (i.e., aquatic toxicity model tiers, corresponding to varying purposes and applications) have been and continue to be developed to predict adverse effects resulting from these exposures. At Tiers 1 and 2, toxicity-based screening thresholds for assumed representative oil component compositions are used to inform spill response and risk evaluations, requiring limited toxicity data, analytical oil characterizations, and computer resources. Concentration-response relationships are employed in Tier 3 to quantify effects of assumed oil component mixture compositions. Oil spill modeling capabilities presently allow predictions of spatial and temporal compositional changes during exposure, which support mixture-based modeling frameworks. Such approaches rely on summed effects of components using toxic units to enable more realistic analyses (Tier 4). This review provides guidance for toxicological studies to inform the development of, provide input to, and validate Tier 4 aquatic toxicity models for assessing oil spill effects on aquatic biota. Evaluation of organisms' exposure histories using a toxic unit model reflects the current state-of the-science and provides an improved approach for quantifying effects of oil constituents on aquatic organisms. Since the mixture compositions in toxicity tests are not representative of field exposures, modelers rely on studies using single compounds to build toxicity models accounting for the additive effects of dynamic mixture exposures that occur after spills. Single compound toxicity data are needed to quantify the influence of exposure duration and modifying environmental factors (e.g., temperature, light) on observed effects for advancing use of this framework. Well-characterized whole oil bioassay data should be used to validate and refine these models.

Ferrocyanide enhanced evaporative flux to remediate soils contaminated with produced water brine.

Accidental releases of highly saline produced water (PW) to land can impact soil quality. The release of associated salts can clog soil pores, disperse soil clays, and inhibit plants and other soil biota. This study explores a novel remediation technique using ferrocyanide to enhance the evaporative flux of soil porewater to transport dissolved salts to the soil surface, where crystallization then occurs. The addition of ferrocyanide modifies crystal growth that enhances salt transport, allowing salt efflorescence on the soil surface and physical removal. Release sites were simulated through beaker sand column experiments using two PWs collected from the Permian Basin. PW composition altered efflorescence, with up to ten times as much ferrocyanide required in PWs than comparable concentrations of pure NaCl solutions. The addition of EDTA reduced dissolved cation competition for the ferrocyanide ion, improving PW salt recovery at the soil surface. The speciation model, PHREEQC, was used to predict the onset of salt precipitation as a function of evaporative water loss and model the effect of aqueous ferrocyanide and EDTA speciation on efflorescence. The results highlight the utility of predictive modeling for optimizing additive dosages for a given release of PW.

Temporal chemical composition changes in water below a crude oil slick irradiated with natural sunlight.

Photooxidation can alter the environmental fate and effects of spilled oil. To better understand this process, oil slicks were generated on seawater mesocosms and exposed to sunlight for 8 days. The molecular composition of seawater under irradiated and non-irradiated oil slicks was characterized using ion mobility spectrometry-mass spectrometry and polyaromatic hydrocarbons analyses. Biomimetic extraction was performed to quantify neutral and ionized constituents. Results show that seawater underneath irradiated oil showed significantly higher amounts of hydrocarbons with oxygen- and sulfur-containing by-products peaking by day 4-6; however, concentrations of dissolved organic carbon were similar. Biomimetic extraction indicated toxic units in irradiated mesocosms increased, mainly due to ionized components, but remained <1, suggesting limited potential for ecotoxicity. Because the experimental design mimicked important aspects of natural conditions (freshly collected seawater, natural sunlight, and relevant oil thickness and concentrations), this study improves our understanding of the effects of photooxidation during a marine oil spill.

Modeling Time-Dependent Aquatic Toxicity of Hydrocarbons: Role of Organism Weight, Temperature, and Substance Hydrophobicity.

Oil spill exposures are highly dynamic and are not comparable to laboratory exposures used in standard toxicity tests. Toxicokinetic-toxicodynamic (TKTD) models allow translation of effects observed in the laboratory to the field. To improve TKTD model calibration, new and previously published data from 148 tests were analyzed to estimate rates characterizing the time course of toxicity for 10 fish and 42 invertebrate species across 37 hydrocarbons. A key parameter in the TKTD model is the first-order rate that incorporates passive elimination, biotransformation, and damage repair processes. The results indicated that temperature (4-26 °C), organism size (0.0001-10 g), and substance log octanol-water partition coefficient (2-6) had limited influence on this parameter, which exhibited a 5th to 95th percentile range of 0.2-2.5 day-1 (median 0.7 day-1 ). A species sensitivity distribution approach is proposed to quantify the variability of this parameter across taxa, with further studies needed for aliphatic hydrocarbons and plant species. Study findings allow existing oil spill models to be refined to improve effect predictions. Environ Toxicol Chem 2022;41:3070-3083. © 2022 ExxonMobil Biomedical Science Inc. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Oil Irradiation Experiments Document Changes in Oil Properties, Molecular Composition, and Dispersant Effectiveness Associated with Oil Photo-Oxidation.

While chemical dispersants are a powerful tool for treating spilled oil, their effectiveness can be limited by oil weathering processes such as evaporation and emulsification. It has been suggested that oil photo-oxidation could exacerbate these challenges. To address the role of oil photo-oxidation in dispersant effectiveness, outdoor mesocosm experiments with crude oil on seawater were performed. Changes in bulk oil properties and molecular composition were quantified to characterize oil photo-oxidation over 11 days. To test relative dispersant effectiveness, oil residues were evaluated using the Baffled Flask Test. The results show that oil irradiation led to oxygen incorporation, formation of oxygenated hydrocarbons, and higher oil viscosities. Oil irradiation was associated with decreased dispersant efficacy, with effectiveness falling from 80 to <50% in the Baffled Flask Test after more than 3 days of irradiation. Increasing photo-oxidation-induced viscosity seems to drive the decreasing dispersant effectiveness. Comparing the Baffled Flask Test results with field data from the Deepwater Horizon oil spill showed that laboratory dispersant tests underestimate the dispersion of photo-oxidized oil in the field. Overall, the results suggest that prompt dispersant application (within 2-4 days), as recommended by current oil spill response guidelines, is necessary for effective dispersion of spilled oil.

Derivation of toxicity thresholds for gas condensate oils protective of tropical species using experimental and modelling approaches.

Toxicity thresholds for dissolved oil applied in tropical ocean risk assessments are largely based on the sensitivities of temperate and/or freshwater species. To explore the suitability of these thresholds for tropical habitats we experimentally determined toxicity thresholds for eight tropical species for a partially weathered gas condensate, applied the target lipid model (TLM) to predict toxicity of fresh and weathered condensates and compared sensitivities of the tropical species with model predictions. The experimental condensate-specific hazard concentration (HC5) was 167 µg L-1 total aromatic hydrocarbons (TAH), with the TLM-modelled HC5 (78 µg L-1 TAH) being more conservative, supporting TLM-modelled thresholds for tropical application. Putative species-specific critical target lipid body burdens (CTLBBs) indicated that several of the species tested were among the more sensitive species in the TLM database ranging from 5.1 (coral larvae) to 97 (sponge larvae) µmol g-1 octanol and can be applied in modelling risk for tropical marine ecosystems.

Toxicity of two representative petroleum hydrocarbons, toluene and phenanthrene, to five Atlantic coral species.

Coral reefs are keystone coastal ecosystems that can be exposed to petroleum hydrocarbons from multiple sources, and when selecting spill response methods to limit environmental damages, corals represent one of the highest valued resources for protection. Because previous research to characterize the sensitivity of coral species to petroleum hydrocarbon exposures is limited, a continuous-flow passive dosing system and toxicity testing protocol was designed to evaluate the acute effects of two representative petroleum compounds, toluene and phenanthrene, on five coral species: Acropora cervicornis, Porites astreoides, Siderastera siderea, Stephanocoenia intersepta, and Solenastrea bournoni. Using analytically confirmed exposures, sublethal and lethal endpoints were calculated for each species, and used as model inputs to determine critical target lipid body burdens (CTLBBs) for characterizing species sensitivity. Further, quantification of the time-dependent toxicity of single hydrocarbon exposures is described to provide model inputs for improved simulation of spill impacts to corals in coastal tropical environments.

Miniaturised marine tests as indicators of aromatic hydrocarbon toxicity: Potential applicability to oil spill assessment.

Assessing oil spill toxicity in real time is challenging due to dynamic field exposures and lack of simple, rapid, and sensitive tests. We investigated the relative sensitivity of two commercially available marine toxicity tests to aromatic hydrocarbons using the target lipid model (TLM). State of the art passive dosing in sealed vials was used to assess the sensitivity of brine shrimp (Artemia franciscana) and rotifer (Brachionus plicatilis). Organisms were exposed to toluene, 1-methylnaphthalene and phenanthrene for 24 h. Toxicity results were analysed using the TLM to estimate the critical target lipid body burden and support comparison to empirical data for 79 other aquatic organisms. Our findings demonstrate the applicability of passive dosing to test small volumes and indicate that the two rapid cyst-based assays are insensitive in detecting hydrocarbon exposures compared to other aquatic species. Our results highlight the limitations of applying these tests for oil pollution monitoring and decision-making.

Assessing the Toxicity of Individual Aromatic Compounds and Mixtures to American Lobster (Homarus americanus) Larvae Using a Passive Dosing System.

Aquatic exposures to aromatic compounds (ACs) may be important contributors to biological effects of oil spills. The present study examined the acute toxicity of 11 ACs and 3 binary AC mixtures on stage 1 American lobster larvae using a passive dosing test design. The ACs investigated covered a range of classes and log octanol-water partition coefficient values (KOW ; 2.5-5.5). Silicone O-rings were used to partition ACs into seawater and maintain stable exposures. Exposed lobster larvae were assessed for mobility and survival at 3, 6, 12, 24, 36, and 48 h. Fluorometry and gas chromatography-mass spectrometry measurements confirmed well-defined substance exposures. Expressing lethality in terms of chemical activities yielded values between 0.01 and 0.1, consistent with a baseline mode of action. Analysis of time-dependent median lethal/effect concentration (L/EC50) values were used to determine incipient values. An expected linear relationship between the incipient log L/EC50 and log KOW was fit to the empirical toxicity data to derive critical target lipid body burdens for immobilization and lethality endpoints. These values indicate that American lobster larvae fall on the sensitive end of the acute species sensitivity distribution. We used AC toxicity data to successfully predict toxicity of binary mixtures assuming additive toxicity. The observed time-dependent toxicity was inversely related to log KOW and occurred more quickly than reported previously. The results contribute to improving models for predicting oil spill impacts on American lobster larvae populations. Environ Toxicol Chem 2021;40:1379-1388. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Assessing toxicity of hydrophobic aliphatic and monoaromatic hydrocarbons at the solubility limit using novel dosing methods.

Reliable delineation of aquatic toxicity cut-offs for poorly soluble hydrocarbons is lacking. In this study, vapor and passive dosing methods were applied in limit tests with algae and daphnids to evaluate the presence or absence of chronic effects at exposures corresponding to the water solubility for representative hydrocarbons from five structural classes: branched alkanes, mono, di, and polynaphthenic (cyclic) alkanes and monoaromatic naphthenic hydrocarbons (MANHs). Algal growth rate and daphnid immobilization, growth and reproduction served as the chronic endpoints investigated. Results indicated that the dosing methods applied were effective for maintaining mean measured exposure concentrations within a factor of two or higher of the measured water solubility of the substances investigated. Chronic effects were not observed for hydrocarbons with an aqueous solubility below approximately 5 µg/L. This solubility cut-off corresponds to structures consisting of 13-14 carbons for branched and cyclic alkanes and 16-18 carbons for MANHs. These data support reliable hazard and risk evaluation of hydrocarbon classes that comprise petroleum substances and the methods described have broad applicability for establishing empirical solubility cut-offs for other classes of hydrophobic substances. Future work is needed to understand the role of biotransformation on the observed presence or absence of toxicity in chronic tests.

Comparison of In Situ and Ex Situ Equilibrium Passive Sampling for Measuring Freely Dissolved Concentrations of Parent and Alkylated Polycyclic Aromatic Hydrocarbons in Sediments.

Equilibrium passive sampling methods (EPSMs) allow quantification of freely dissolved contaminant concentrations (Cfree ) in sediment porewater. Polydimethylsiloxane (PDMS) is a convenient sampling polymer that can be equilibrated in field (in situ) or laboratory (ex situ) sediments to determine Cfree , providing reliable compound-specific PDMS-water partition coefficients (KPDMS-water ) are available. Polycyclic aromatic hydrocarbons (PAHs) are an important class of sediment contaminants comprised of parent and alkylated homologs. However, application of EPSM to alkylated PAHs is challenged by lack of KPDMS-water measurements. Our first objective was to obtain KPDMS-water for 9 alkylated PAHs and biphenyls using 3 different PDMS-coated fibers. Quantitative relationships were then established to define KPDMS-water for 18 parent and 16 alkyl PAHs included in the US Environmental Protection Agency's sediment quality benchmark method for benthic life protection based on additive toxic units. The second objective was to compare Cfree in porewater obtained using both in situ and ex situ EPSMs at 6 Baltic Sea locations. The results indicated that in situ and ex situ Cfree for alkyl PAHs generally agreed within a factor of 3. Further, all sites exhibited additive toxic units <1, indicating that PAHs pose a low risk to benthos. The results extend practical application of EPSMs for improved risk assessment and derivation of porewater-based remediation goals for PAH-contaminated sediments. Environ Toxicol Chem 2020;39:2169-2179. © 2020 SETAC.